To Next Page
D
Deborah JohnsonSep 1, 2025
Why does my GE JS645EL Ranges display flash?
- DdeborahchavezSep 1, 2025
The display on your GE Ranges flashes because of a power failure. Reset the clock.
Why does my GE JS645EL Ranges display flash?
The display on your GE Ranges flashes because of a power failure. Reset the clock.
Why is there a strong odor coming from my GE JS645EL Ranges?
An odor from the insulation around the inside of the oven is normal for the first few times the GE Ranges oven is used. This is temporary and will go away after several uses or a self-clean cycle.
How to fix excessive smoking during clean cycle on GE Ranges?
If you experience excessive smoking during the clean cycle of your GE Ranges, it's likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to ventilate the room, wait until the locked light goes off, wipe up the excess soil, and then reset the clean cycle.
What causes areas of discoloration on my GE JS645EL Ranges cooktop?
Areas of discoloration on the cooktop can be caused by food spillovers not cleaned before the next use. On a model with a light-colored cooktop, it can also be caused by a hot surface. The surface may appear discolored when it is hot, but this is temporary and will disappear as the glass cools.
Why does my GE JS645EL Ranges oven door glass appear to be "tinted" or have a "rainbow" color?
The inner oven glass is coated with a heat barrier to reflect the heat back into the oven to prevent heat loss and keep the outer door cool while baking. This is normal. Under certain light or angles you may see this tint or rainbow color.
Why is my GE JS645EL drawer not sliding smoothly or drags?
If the drawer on your GE Ranges does not slide smoothly or drags, the drawer may be out of alignment. Fully extend the drawer and push it all the way in. The drawer may also be over-loaded or the load may be unbalanced. Reduce weight and redistribute drawer contents.
What to do if my GE JS645EL oven is not clean after a clean cycle?
If your GE Ranges oven is not clean after a clean cycle, clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
What to do if my GE Ranges oven will not self-clean?
If your GE Ranges oven will not self-clean, first ensure that the oven has cooled down, as the temperature may be too high to start a self-clean operation. Also, make sure the oven door is completely closed.
What to do if my GE Ranges oven door will not open after a clean cycle?
If the oven door on your GE Ranges will not open after a clean cycle, it's likely that the oven is still too hot. Allow the oven to cool down below the locking temperature.
What to do if my GE JS645EL clock and timer do not work?
If the clock and timer on your GE Ranges are not working, first check the fuse box or circuit breaker in your home and replace the fuse or reset the circuit breaker if necessary. Also, ensure that the range is fully plugged into a properly grounded electrical outlet. Check the clock display settings in the Special Features section and ensure that the oven controls are properly set.
General
