What to do if surface units do not work properly on my GE JS645SL3SS?
If the surface units on your GE Ranges aren't heating up properly, it could be due to a blown fuse or tripped circuit breaker in your home. Try replacing the fuse or resetting the circuit breaker. Also, make sure the cooktop controls are correctly set for the surface unit you're using.
Why GE JS645SL3SS oven will not self-clean?
If your GE Ranges oven won't self-clean, it could be due to a few reasons. If the oven temperature is too high, allow it to cool down before resetting the controls. Also, make sure the oven controls are properly set. Ensure the oven door is completely closed.
What to do if my GE Ranges has a power outage and clock flashes?
This indicates a power outage or surge. Reset the clock. If the oven was in use, reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why GE JS645SL3SS Ranges surface units will not maintain a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking isn't fast enough, it might be because you're using the wrong type of cookware. Make sure you're using flat pans that match the diameter of the surface unit. If the power voltage in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
Why does my GE JS645SL3SS Ranges surface unit stop glowing when turned to a lower setting?
If the surface unit on your GE Ranges stops glowing when turned to a lower setting, the unit is still on and hot. This is normal.
Why does the display on my GE JS645SL3SS go blank?
If the display on your GE Ranges goes blank, first check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker. Also, check the Special features section to ensure the clock is turned on.
What causes scratches on my GE JS645SL3SS Ranges cooktop glass surface?
Scratches on your GE Ranges cooktop glass surface can be caused by incorrect cleaning methods or cookware with rough bottoms, or coarse particles (salt or sand) between the cookware and the surface. To avoid scratches, use the recommended cleaning procedures. Make sure bottoms of cookware are clean before use, and use cookware with smooth bottoms.
Why is there a strong odor coming from my GE Ranges oven?
If you detect a strong odor when using your GE Ranges oven for the first few times, it's normal due to the insulation. This will disappear after several uses or after running a self-clean cycle.
What to do if food does not bake properly in GE JS645SL3SS?
If food isn't baking properly in your GE Ranges, several factors could be the cause. Make sure the oven controls are set correctly. Check that the rack position is correct and the rack is level. Ensure you're using the correct cookware of the proper size. It may be necessary to adjust the oven temperature; see the Special Features section. Lastly, consider that ingredient substitutions can affect the outcome.
What to do if food does not broil properly in GE JS645SL3SS Ranges?
If food isn't broiling properly in your GE Ranges, ensure you've selected the appropriate broil mode. Check the Cooking Guide for proper rack position suggestions. Make sure the cookware is cool before use and is specifically designed for broiling. If using aluminum foil, conform to pan slits. In areas with low voltage, preheat the broil element for 10 minutes.
General| Brand | GE |
|---|---|
| Model | JS645SL3SS |
| Type | Slide-In |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Wi-Fi Connect | No |
| Color | Stainless Steel |
| Width | 30 in. |
| Cooktop Surface | Smooth Surface |
To Next Page
