How to stop excessive smoking during clean cycle of GE Ranges?
If there's excessive smoking during the clean cycle of your GE Ranges, press the Cancel/Off pad. Open windows to clear the smoke. Once the LOCK light turns off, wipe up the excess soil and then reset the clean cycle.
What to do if my GE Ranges has a power outage and clock flashes?
This indicates a power outage or surge. Reset the clock. If the oven was in use, reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
What to do if plastic melted to the surface of my GE JS645SL3SS cooktop?
If you've melted plastic onto the surface of your GE Ranges cooktop, refer to the 'Cleaning the glass cooktop' section for guidance, as there's a risk of permanent damage if not handled properly.
What causes food to not bake properly in GE JS645SL3SS?
If food doesn't bake properly in your GE Ranges oven, start by checking the oven controls to ensure they are set correctly, referring to the Cooking Modes section. Also, verify that the rack position is correct and level, consulting the Cooking Modes section and Cooking Guide. Ensure you're using the correct cookware of the proper size, as described in the Cookware section. If needed, adjust the oven temperature as explained in the Special Features section. Finally, be aware that ingredient substitutions can affect the recipe's outcome.
Why does my new GE JS645SL3SS Ranges oven cook differently?
If your new GE Ranges oven cooks differently than your old one, it's because it has a different cooking system. Carefully follow recipe times and temperatures for the first few uses. If you still think the oven is too hot or cold, you can adjust the temperature in the Special Features section to match your cooking preferences. This adjustment affects Bake and Convection Bake temperatures only.
Why does the display on my GE JS645SL3SS go blank?
If the display on your GE Ranges goes blank, first check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker. Also, check the Special features section to ensure the clock is turned on.
Why does my GE JS645SL3SS Ranges oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
Why does the display on my GE JS645SL3SS flash?
If the display on your GE Ranges is flashing, it indicates a power failure. Reset the clock.
Why is my GE JS645SL3SS beeping after entering cooking time or start time?
If your GE Ranges is signaling after entering a cooking time or start time, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and the desired temperature, or the Self Clean pad and the desired clean time.
Why does my GE Ranges display go blank?
A blown fuse or tripped circuit breaker in your home could cause this. Replace the fuse or reset the circuit breaker. Alternatively, the clock might be turned off; check the Special features section to turn it back on.
General| Brand | GE |
|---|---|
| Model | JS645SL3SS |
| Type | Slide-In |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Wi-Fi Connect | No |
| Color | Stainless Steel |
| Width | 30 in. |
| Cooktop Surface | Smooth Surface |
To Next Page
