Why does my GE JS645SL3SS Ranges have a strong odor?
If you notice a strong odor when using your GE Ranges for the first few times, it's normal. This odor comes from the insulation around the inside of the oven and will go away after several uses or a self-clean cycle.
Why are my GE Ranges surface units not maintaining a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking is not fast enough, it could be due to improper cookware. Ensure you are using flat-bottomed pans that match the diameter of the surface unit. In some areas, low voltage may also be a factor. Covering the pan with a lid can help until the desired heat is achieved.
Why is my GE JS645SL3SS beeping after entering cooking time or start time?
If your GE Ranges is signaling after entering a cooking time or start time, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and the desired temperature, or the Self Clean pad and the desired clean time.
What causes “crackling” or “popping” sounds in GE JS645SL3SS Ranges?
The "crackling" or "popping" sound you hear in your GE Ranges is the sound of the metal heating and cooling during both the cooking and cleaning functions. This is normal.
Why does my GE JS645SL3SS Ranges oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
Why does my GE JS645SL3SS control signals after entering cooking time or start time?
If your GE Ranges control signals after entering cooking time or start time, you likely forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
What does it mean if my GE JS645SL3SS control signals after entering cooking time or start time?
If your GE Ranges signals after entering cooking time or start time, you likely forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
Why does my GE Ranges display go blank?
A blown fuse or tripped circuit breaker in your home could cause this. Replace the fuse or reset the circuit breaker. Alternatively, the clock might be turned off; check the Special features section to turn it back on.
Why do my GE JS645SL3SS Ranges surface units keep cycling on and off?
If you experience frequent cycling off and on of surface units on your GE Ranges, it is often due to improper cookware. Use only flat cookware to minimize cycling.
How to reduce excessive smoking during broiling in GE JS645SL3SS?
To reduce excessive smoking during broiling in your GE Ranges, lower the rack position of the food, increasing the distance between the food and the burner element.
General| Brand | GE |
|---|---|
| Model | JS645SL3SS |
| Type | Slide-In |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Wi-Fi Connect | No |
| Color | Stainless Steel |
| Width | 30 in. |
| Cooktop Surface | Smooth Surface |
To Next Page
