Why am I unable to get the display to show “oFFSEt” on my GE JS660SLSS?
If you're unable to get the display to show “oFFSEt” on your GE Ranges, make sure the Broil Hi/Lo and Bake pads are touched at the same time and held for 3 seconds.
Why does my GE Ranges oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
What to do if surface units do not work properly on my GE JS660SLSS Ranges?
If the surface units on your GE Ranges aren't heating up properly, it could be due to a blown fuse or tripped circuit breaker in your home. Try replacing the fuse or resetting the circuit breaker. Also, make sure the cooktop controls are correctly set for the surface unit you're using.
Why GE JS660SLSS Ranges surface units will not maintain a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking isn't fast enough, it might be because you're using the wrong type of cookware. Make sure you're using flat pans that match the diameter of the surface unit. If the power voltage in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
Why does my GE JS660SLSS oven light does not work?
If the oven light does not work, tighten or replace the bulb.
What does it mean when "LOCK DOOR" flashes in the display of my GE JS660SLSS?
The "LOCK DOOR" flashing in the display of your GE Ranges indicates that the self-clean cycle has been selected, but the oven door is not closed. Close the oven door and latch it if your unit has a manual latch.
Why is the DOOR LOCK light on when I want to cook on my GE JS660SLSS Ranges?
The DOOR LOCK light is on because the oven door is locked, as the temperature inside the GE Ranges oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool.
Why GE JS660SLSS oven will not self-clean?
If your GE Ranges oven won't self-clean, it could be due to a few reasons. If the oven temperature is too high, allow it to cool down before resetting the controls. Also, make sure the oven controls are properly set. Ensure the oven door is completely closed.
What causes “crackling” or “popping” sounds in GE Ranges?
The "crackling" or "popping" sound you hear in your GE Ranges is the sound of the metal heating and cooling during both the cooking and cleaning functions. This is normal.
How to get the display to show “oFFSEt” on my GE Ranges?
The Broil Hi/Lo and Bake pads must be touched at the same time and held for 3 seconds.
General| Style | single oven, slide-in |
|---|---|
| Color | stainless steel |
| Total Capacity | 5.3 cubic feet |
| Induction | no |
| Number of Oven Racks | 2 |
| Number of Oven Rack Positions | 6 |
| Interior Light | yes |
| Fuel | electric |
Weight and Dimensions| Depth | 28 1/4 inches |
|---|---|
| Height | 37 1/4 inches |
| Width | 29 7/8 inches |
| Net Weight | 154 pounds |
To Next Page
