What to do if GE JS660SLSS Ranges surface units do not work properly?
If the surface units on your GE Ranges aren't working, first check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; if so, replace the fuse or reset the breaker. Also, ensure that the cooktop controls are correctly set for the surface unit you are attempting to use.
What does it mean when "LOCK DOOR" flashes in the display of my GE JS660SLSS?
The "LOCK DOOR" flashing in the display of your GE Ranges indicates that the self-clean cycle has been selected, but the oven door is not closed. Close the oven door and latch it if your unit has a manual latch.
Why are my GE JS660SLSS Ranges oven racks are difficult to slide?
If the shiny, silver-colored racks were cleaned in a self-clean cycle, apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with it. Do not spray with Pam® or other lubricant sprays.
Why there is excessive smoking during clean cycle of my GE Ranges oven?
If you notice excessive smoking during a clean cycle in your GE Ranges oven, it's likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to ventilate the room, wait for the Locked light to turn off, wipe up the excess soil, and then restart the clean cycle.
Why there is steam from the vent of my GE Ranges?
When using the ovens, it is normal to see steam coming out of the oven vents of your GE Ranges. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal.
Why does my GE Ranges display flashes?
The display flashes because of a power failure. Reset the clock.
Why are my GE JS660SLSS Ranges surface units not maintaining a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking is not fast enough, it could be due to improper cookware. Ensure you are using flat-bottomed pans that match the diameter of the surface unit. In some areas, low voltage may also be a factor. Covering the pan with a lid can help until the desired heat is achieved.
Why is my GE JS660SLSS beeping after entering cooking time or start time?
If your GE Ranges is signaling after entering a cooking time or start time, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and the desired temperature, or the Self Clean pad and the desired clean time.
Why does the display on my GE JS660SLSS Ranges flash?
If the display on your GE Ranges is flashing, it indicates a power failure. Reset the clock.
Why does my GE Ranges oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
General| Style | single oven, slide-in |
|---|---|
| Color | stainless steel |
| Total Capacity | 5.3 cubic feet |
| Induction | no |
| Number of Oven Racks | 2 |
| Number of Oven Rack Positions | 6 |
| Interior Light | yes |
| Fuel | electric |
Weight and Dimensions| Depth | 28 1/4 inches |
|---|---|
| Height | 37 1/4 inches |
| Width | 29 7/8 inches |
| Net Weight | 154 pounds |
To Next Page
