What causes scratches on my GE Ranges cooktop glass surface?
Scratches on your GE Ranges cooktop glass surface can be caused by incorrect cleaning methods or cookware with rough bottoms, or coarse particles (salt or sand) between the cookware and the surface. To avoid scratches, use the recommended cleaning procedures. Make sure bottoms of cookware are clean before use, and use cookware with smooth bottoms.
What does it mean if my GE Ranges control signals after entering cooking time or start time?
If your GE Ranges signals after entering cooking time or start time, you likely forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
What causes pitting (or indentation) of the GE Ranges cooktop?
If there is pitting (or indentation) of the cooktop, it is likely due to a hot sugar mixture spilled on the cooktop. Call a qualified technician for replacement.
Why is my GE JS660SLSS drawer not sliding smoothly or drags?
If the drawer on your GE Ranges does not slide smoothly or drags, the drawer may be out of alignment. Fully extend the drawer and push it all the way in. The drawer may also be over-loaded or the load may be unbalanced. Reduce weight and redistribute drawer contents.
Why are my GE Ranges surface units cycling off and on frequently?
If the surface units on your GE Ranges are cycling off and on frequently, it could be due to improper cookware. Use only flat cookware to minimize cycling.
Why is there steam from the vent of my GE Ranges?
When using the ovens, it is normal to see steam coming out of the oven vents. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal.
What does it mean when "F— and a number or letter" flash in the display of GE Ranges?
When "F— and a number or letter" flash in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad and allow the oven to cool for one hour before putting it back into operation. If the code repeats, disconnect all power to the oven for at least 32 seconds and then reconnect power. If the function error code repeats, call for service.
Why does my GE JS660SLSS oven light does not work?
If the oven light does not work, tighten or replace the bulb.
What to do if GE JS660SLSS Ranges surface units do not work properly?
If the surface units on your GE Ranges aren't working, first check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; if so, replace the fuse or reset the breaker. Also, ensure that the cooktop controls are correctly set for the surface unit you are attempting to use.
Why doesn't food broil properly in my GE JS660SLSS Ranges?
If food doesn't broil properly in your GE Ranges, make sure you select the appropriate broil mode. Refer to the Cooking Guide for rack location suggestions. Ensure the cookware is cool and suited for broiling. If using aluminum foil, conform to pan slits. For areas with low voltage, preheat the broil element for 10 minutes.
General| Style | single oven, slide-in |
|---|---|
| Color | stainless steel |
| Total Capacity | 5.3 cubic feet |
| Induction | no |
| Number of Oven Racks | 2 |
| Number of Oven Rack Positions | 6 |
| Interior Light | yes |
| Fuel | electric |
Weight and Dimensions| Depth | 28 1/4 inches |
|---|---|
| Height | 37 1/4 inches |
| Width | 29 7/8 inches |
| Net Weight | 154 pounds |
To Next Page
