K
Kayla SmithSep 16, 2025
Why does the display of my GE JS660SLSS Ranges flash?
- GgdavisSep 16, 2025
If the display on your GE Ranges flashes, it usually indicates a power failure. Reset the clock to resolve the issue.
Why does the display of my GE JS660SLSS Ranges flash?
If the display on your GE Ranges flashes, it usually indicates a power failure. Reset the clock to resolve the issue.
Unable to get the display to show 'oFFSEt' on my GE JS660SLSS, what to do?
If you can't get the display to show 'oFFSEt' on your GE Ranges, make sure you're touching the Broil Hi/Lo and Bake pads at the same time and holding them for 3 seconds.
Why does my GE JS660SLSS Ranges control signals after entering cooking time or start time?
If your GE Ranges control signals after entering cooking time or start time, you likely forgot to enter a bake temperature or cleaning time. Touch the Bake pad and desired temperature or the Self Clean pad and desired clean time.
Why are my GE Ranges oven racks difficult to slide?
If the oven racks in your GE Ranges are difficult to slide, especially the shiny, silver-colored ones, it might be because they were cleaned during a self-clean cycle. Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with it. Do not use lubricant sprays.
Why my GE Ranges drawer does not slide smoothly or drags?
If the drawer on your GE Ranges doesn't slide smoothly or drags, it could be out of alignment. Fully extend the drawer and push it all the way in. Also, the drawer might be overloaded or the load unbalanced. Reduce the weight and redistribute the contents.
Why there is steam from the vent of my GE Ranges?
When using the ovens, it is normal to see steam coming out of the oven vents of your GE Ranges. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal.
What to do if food does not broil properly in my GE Ranges oven?
If food isn't broiling properly in your GE Ranges oven, ensure you've selected the appropriate broil mode and are using the correct rack position as suggested in the Cooking Guide. Also, make sure your cookware is cool and specifically designed for broiling. If using aluminum foil, ensure it's properly fitted and slit as recommended. In areas with low voltage, preheat the broil element for 10 minutes.
Why is my GE JS660SLSS Ranges oven not clean after self-cleaning?
If your GE Ranges oven isn't clean after running a clean cycle, it might be due to improperly set oven controls. Please refer to the Cleaning the Oven section for guidance. Also, heavily soiled ovens may require a second cleaning cycle or a longer cleaning time. It's best to clean up any significant spillovers before starting the self-clean cycle.
Why does my new GE JS660SLSS oven cook differently?
If your new GE Ranges oven cooks differently than your old one, it's because it has a different cooking system. Carefully follow recipe times and temperatures for the first few uses. If you still think the oven is too hot or cold, you can adjust the temperature in the Special Features section to match your cooking preferences. This adjustment affects Bake and Convection Bake temperatures only.
Why is the oven light not working in my GE JS660SLSS Ranges?
If the oven light in your GE Ranges isn't working, first check if the light bulb is loose or defective and tighten or replace it. If that doesn't work, the pad operating the light might be broken, requiring you to call for service. Also, verify that the oven is not in Sabbath mode by checking the Special Features section.
Style | single oven, slide-in |
---|---|
Color | stainless steel |
Total Capacity | 5.3 cubic feet |
Induction | no |
Number of Oven Racks | 2 |
Number of Oven Rack Positions | 6 |
Interior Light | yes |
Fuel | electric |
Depth | 28 1/4 inches |
---|---|
Height | 37 1/4 inches |
Width | 29 7/8 inches |
Net Weight | 154 pounds |