ADJUST THE OVEN
THEWOSTAT—
DO
ZT
YOURSELF!
You may feel that your
new
oven cooks differently
We
do not recommend the use of inexpensive
than the one it replaced.
We recommend that you
thermometers, such
as
those
found
in
grocery
stores.
use your new oven for
a
few weeks to become more
to check the
tempertiture
setting of your new
oven.
familiar with it, following the times given in your
These thermometers
may
vary
2040
degrees.
recipes
as
a
guide.
If you think your new oven is too hot or too cool,
you can adjust the thermostat yourself.
If
you
think
it is too hot,
adjust
the thermostat to make it cooler. If
you think it is too cool, adjust the thermostat to make
it hotter.
Upper Oven
To Adjust the Thermostat:
1.
Press the BAKE pad.
2. Select an oven temperature between
500°F.
and
550°F.
3. Immediately, before ON is displayed, press and
hold the BAKE pad for about four seconds. The
display will change to the oven adjustment display.
4. The oven temperature can be adjusted up to
(+)
35”F.
hotter or (-)
35°F.
cooler. Use the INCREASE or
DECREASE pad to select the desired change in
the display.
5. When you have made the adjustment, press the
CLEAWOFF pad to
go
back to the time of day
display. Use your oven as you would normally.
NOTE:
This adjustment will not affect the broiling
or self-cleaning temperatures. It will be retained in
memory after a power failure.
—
Lower Oven
3. Hold both parts of the knob as shown in the
Pull the knob off the shaft, look at the back of the
illustration of the back of the OVEN TEMP
knob and note the current setting before making
knob and turn so the lower screw moves in
any adjustment.
The knob is factory set with the top
the desired direction.
YOLI
will hear and feel the
screw directly under the pointer.
notches as you turn the knob. Each notch changes
temperature about 10° Fahrenheit.
Back of the OVEN
TEMP
knob
Lower screw moves toward HOTTER or COOLER
To
Adjust the Thermostat:
1.
Pull off the knob.
2. Loosen both screws on back of the knob.
4. Tighten the screws.
5. Return the knob to the oven.
Re-check oven performance before making any
additional adjustments.
The
lower screw
moves toward
HOTTER
to
increase
the
temperature.
The
lower screw
moves toward
COOLER
to
decrease
the
temperature.
14
To Next Page
Loading...
