
Do you have a question about the GE JVM6175EF1ES and is the answer not in the manual?
| Brand | GE |
|---|---|
| Model | JVM6175EF1ES |
| Type | Over-the-Range Microwave |
| Capacity | 1.7 cu. ft. |
| Cooking Power | 1000 watts |
| Exhaust Fan | Yes |
| Turntable | Yes |
| Control Type | Electronic Touch |
| Color | Stainless Steel |
| Sensor Cooking | Yes |
| Vent CFM | 300 CFM |
| Venting Options | External, Recirculating |
Specifies the voltage, frequency, amperage, and wiring requirements for the appliance.
Details an example outdoor top exhaust ductwork installation.
Details an example outdoor back exhaust ductwork installation.
Specifies the maximum equivalent duct length for air movement.
Guidelines for handling damage during shipment or installation.
Lists hardware and additional parts provided with the microwave oven.
Lists the necessary tools for installing the microwave oven.
Specifies the required clearance and dimensions for installation.
Steps for safely removing the microwave from packaging and the mounting plate.
Methods for locating wall studs for secure mounting of the plate.
Finding the correct position for the wall plate under the cabinet.
Positioning and marking the wall plate for drilling.
Instructions for installing the microwave with vertical ducting to the outside.
Instructions for installing the microwave with horizontal ducting to the outside.
Instructions for installing the microwave without external venting.
Steps for securing the mounting plate to the wall for top exhaust.
Using the template to prepare the top cabinet for mounting the microwave.
Verifying the damper functions correctly before mounting the unit.
Instructions for lifting and securing the microwave oven to the mounting plate.
Adjusting the exhaust adaptor to connect with the house ductwork.
Steps for connecting the exhaust duct to the microwave.
Cutting an opening in the rear wall for external exhaust.
Securing the mounting plate to the wall for back exhaust installation.
Preparing the top cabinet using the template for this installation type.
Modifying the microwave blower for rear exhaust venting.
Instructions for lifting and securing the microwave to the mounting plate.
Securing the mounting plate to the wall for recirculating installation.
Preparing the top cabinet using the template for recirculating installation.
Modifying the microwave blower for non-vented recirculation.
Instructions for lifting and securing the microwave to the mounting plate.
Steps for installing the charcoal filter for recirculating models.
Loading...