GE MEDICAL SYSTEMS LOGIQ A1 BASIC SERVICE MANUAL
REV 2 5176463-100
6
1-3 Safety Considerations
1-3-1 Warning
Read below notes carefully before using the system.
1. Read LOGIQ A1 User Manual before using the system and put it in an easy-to-reach
place.
2. Only the trained person can operate or repair LOGIQ A1. It is necessary to avoid the
unwanted ultrasound radicalization although emissive energy of LOGIQ A1
transducer is within standard limitation. ,
3. Only specified power cord is allowed to avoid shock. Power pin needs to be
connected to fixed socket with ground protection. Commutator is not allowed.
System is required to work within the rating voltage.
4. Probes need to be maintained carefully. It is dangerous to use damaged probe on
patient. Image quality is influenced by damaged probe too. The damaged probe
must be discarded, using repaired probe is forbidden. Do not touch the probe surface
with the
speculate things or knock the probe.
5. Do not put any liquid over or on the top of mainframe. There might be current
leakage if electric parts are touched by liquid. Only trained service representative
can open the system mainframe to repair the system. Customer are not allowed to
open the system mainframe.
6. Do not use electric vibrating generator while using LOGIQ A1.
7. Use the machine in the prescriptive condition, otherwise it might disturb radiogram
and TV. In order to avoid this situation, please use the machine according to the
User Manual and Service Manual.
To Next Page
Loading...
Need help?
General
