EasyManua.ls Logo

GE LOGIQ C5 - Safety Labels and Documentation; Console Label Identification

GE LOGIQ C5
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LOGIQ C5/C5 PRO Quick Guide Direction 5272220-100 Rev. 2 45
Safety
Acceptable Devices
The devices shown in “Patient Environmental Devices” on page 44 are specified to be suitable for use within the PATIENT ENVIRONMENT.
Unapproved Devices
Accessories, Options, Supplies
DO NOT connect any probes or accessories without approval by GE within the PATIENT ENVIRONMENT.
See ”Peripheral Update for EC countries” on page 41 for more information.
Unapproved devices, such as unsupported printers, VCRs, etc. should not be used in the patient environment.
If devices are connected without the approval of GE, the warranty will be INVALID.
Any device connected to the LOGIQ C5/C5 PRO must conform to one or more of the requirements listed below:
1. IEC standard or equivalent standards appropriate to devices.
2. The devices shall be connected to PROTECTIVE EARTH (GROUND).
CAUTION
Unsafe operation or malfunction may result. Use only the accessories, options and supplies approved or recommended in these
instructions for use.

Related product manuals