LOGIQ
LOGIQ E10s: Scan on Battery Option
Approximate Charging time (empty to full)
Scan on Battery- 2.5 hours
Battery Status Icon in the Title Bar
91-100%
81-90%
71-80%
61-70%
51-60%
41-50%
31-40%
16-30%
0-15%
It is strongly recommended to
connect to AC power when the
fuel gage icon is yellow or red.
Battery Charging
Whether the system is on or off, the battery will
charge as long as the system is connected to AC
power via the power cord, and the breaker is on.
A fan will run while the battery is charging. The fan
will stop when the battery is done charging.
While the battery is charging
the front LED will blink. When
the battery is fully charged the
LED will stop
blinking and
remain on.
To Next Page
Loading...
