EasyManua.ls Logo

GE LOGIQ S8 Vet User Manual

GE LOGIQ S8 Vet
418 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GE Healthcare
(FEBRUARY
28
,
2019)
COVER.FM
PRELIMINARY
LOGIQ S8/LOGIQ E8
Service Manual
Document Number: 5394227
Revision: 12

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the GE LOGIQ S8 Vet and is the answer not in the manual?

GE LOGIQ S8 Vet Specifications

General IconGeneral
BrandGE
ModelLOGIQ S8 Vet
CategoryMedical Equipment
LanguageEnglish

Summary

Chapter 1 Introduction

Section 1-4 Safety Considerations

Outlines crucial safety precautions for operation, service, and repair.

Section 1-7 Lockout/Tagout (LOTO) Requirements

Details OSHA Lockout/Tagout requirements for service procedures.

Chapter 2 Site preparations

Section 2-2-2 Electrical Requirements

Outlines essential electrical requirements, including dedicated power and outlet specifications.

Section 2-3-2 Required Facility Needs

Lists mandatory site requirements including power, door opening, and space.

Chapter 3 System Setup

Section 3-2-2 Setup warnings

Lists important warnings and precautions to be observed during system setup.

Section 3-3 Receiving and unpacking the equipment

Provides crucial warnings regarding the handling and unpacking of the system.

Section 3-6 Completing the Set Up

Verifies system requirements and specifications before final setup.

Section 3-7 Power On/Off

Covers safety precautions for powering the system on and off, including battery use.

Section 3-12 Configuring Connectivity

Guides on configuring TCP/IP settings and managing devices for network connectivity.

Chapter 4 Functional Checks

Chapter 6 Service Adjustments

Section 6-3 Volume Navigation Calibration Procedure

Guides on setting up for Volume Navigation calibration and measuring initial accuracy.

Chapter 7 Diagnostics/Troubleshooting

Section 7-4 Service Desktop (CSD) - R1 to R4

Describes features and tools within the Common Service Desktop.

Section 7-6 Service Desktop (R4.2.5x and later)

Covers features of the Service desktop, including disruptive mode and utilities.

Section 7-7 Troubleshooting Trees, Instructions and Tech Tips

Provides troubleshooting guides for common system issues like boot failures and noise.

Chapter 9 Care & Maintenance

Section 9-2 Warnings

Lists general warnings and precautions related to system maintenance.

Section 9-8 Electrical Safety Tests

Introduces electrical safety tests based on NFPA and IEC standards.

Related product manuals