GE MAC 1200

10-16 MAC 1200/1200 ST Revision C
2012250-021
System Setup: Stress Test Mode
Deleting a Phase
1. Delete the phase to delete and confirm with . The cursor moves
to the command menu.
2. Position the cursor on [del phase] and push .
3. Confirm the delete command with .
Adding a Stage
1. Select the stage that is to follow the new stage and push . The
cursor moves to the command menu.
2. Position the cursor on [add stage] and confirm with . A copy of
the stage to edit is added.
Deleting a Stage
1. Select the stage to delete and confirm with . The cursor moves to
the command menu.
2. Position the cursor on [del. stage] and push .
3. Confirm the delete command with .