GE MAC 1200 Operator's Manual

Revision C MAC 1200/1200 ST 10-25
2012250-021
System Setup: System Setup
Setup
 Automatic
 Manual
 Stress Test
 Arrhythmia
Transmission Log
After each transmission of ECG records, the MAC 1200/1200 ST unit can
generate a transmission log report. This report includes a list of the ECG
reports transmitted.
To enable the transmission log function, follow these steps.
1. Within the System Setup window, move the cursor to the prompt
Enable the Print ECG Tx. Log.
2. Select Yes.
3. Save this setting by pressing .
Check Record Retxn
If a user attempts to transmit a record that has already been transmitted
when the Check Record Retxn function is enabled, a message displays
informing the user that this record has already been transmitted.
The Check Record Retxn function defaults to No.
To enable the Check Record Retxn function, follow these steps.
1. Within the System Setup window, move the cursor to the prompt
Check Record Retxn.
2. Select Yes.
3. Save this setting by pressing .

GE MAC 1200 Specifications

General

ECG Channels	12
Display	LCD
Power Supply	AC or battery
Frequency Response	0.05 to 150 Hz
Memory	Internal storage for ECG data
Device Type	ECG
Printing	Thermal
Filters	AC filter
Connectivity	RS-232, USB
Sampling Rate	1000 samples per second per channel