GE MDS SD4 Series - Standard Accessories

2 MDS SD4 Startup Guide 05-4669A01, Rev. A
Invisible place holder
Figure 2. Front Panel Connectors & Indicators
Connector functions
(left to right)
are as follows:
•POWER
• LAN
(RJ-45)
•
COM1—
Management/Diagnostics (DB-9)
•
COM2—
Payload Data (DB-9)
•
ANTENNA
(TNC)
LED functions are described in Table 3 on Page 9.
Standard Accessories
Table 1 lists accessories normally shipped with the transceiver. The
contents may have been modified to reflect customer-specific require-
ments specified at the time of order. Additional accessories are avail-
able. Refer to the
SD4 Reference Manual
for a complete list.