GE MultiLink ML1600 Quick Start Guide

QS–50 MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
QUICK START GUIDE
Z Login at the manager level with the proper password.
It is recommended that you save the current switch configuration before upgrading the
firmware.
Z If the current firmware is older than 1.7.3, use the saveconf
command as shown below:
Z If the current firmware is 1.7.3 or above, enter the xmodem
command as shown below:
Z Click on the Transfer menu item and choose the Receive File
option.

GE MultiLink ML1600 Specifications

General

Brand	GE
Model	MultiLink ML1600
Category	Switch
Language	English