CHAPTER 1: INTRODUCTION OVERVIEW
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL 1–3
• 20 channel data logger, customer configurable sample period from 1 cycle to 60
minutes
• Waveform capture, 10 channels, up to 256 cycles each 16 samples/sec
• Auto Load Shed with voltage, frequency and kW triggers
Option C:
Option Package B plus:
• 4 additional inputs and outputs (total 8 in, 8 out
Option D:
Option Package C plus:
• 4 additional inputs and outputs (total - 12 in, 12 out)
• FlexLogic for user-customized control logic
Option M:
• Configuration for Manual operation only (non-Automatic)
A single-line diagram for the MX350 is shown below.
To Next Page
Loading...
