Need help?Do you have a question about the GE NetworX NX-148E and is the answer not in the manual?
General| Type | Keypad |
|---|---|
| Display | LCD |
| Buttons | 16 |
| Zones | Up to 8 |
| Programmable Function Keys | Yes |
| LED Indicators | Yes |
| Power Source | 12V DC |
| Current Draw | 50mA |
| Mounting | Wall mount |
| Backlit | Yes |
| Compatibility | NetworX series control panels |
An option allowing a delay in reporting to the central station.
The level of access an individual has when using an alarm panel.
Location where alarm data is sent during an alarm report.
Allows keypad to sound a ding-dong upon entry/exit.
Defines User Codes and Function Codes; 4 or 6 digits.
Sends a special code to the central station under duress.
Allows arming with open zones; ready light flashes.
A 4 or 6 digit code programmed to operate a device.
Allows bypassing multiple zones with a single operation.
Allows instant alarm or entry/exit delay.
A master code to program other user codes.
System divided into areas controlled by users.
The outer edge of the protected area.
Arms system using Stay or Exit keys.
A 4 or 6 digit code to arm or disarm the system.
Indicates if the system is armed or has an alarm history.
Shows if any zone in the partition is bypassed.
Flashes during abort delay; indicates cancel report sent.
Indicates if the chime feature is active.
On during exit delay; flashes last 10 seconds.
Indicates fire zone fault or trouble condition.
Indicates primary power; flashes for low battery.
Shows system readiness to arm or force arm.
Illuminated when interior zones are bypassed.
Shows 'Instant' for entry/exit doors without delay.
Steps to arm the system when leaving the premises.
Identifying and bypassing zones for readiness.
Steps to arm the system for interior protection.
Allows quick arming using Exit or Stay keys.
Toggling entry/exit delay and initiating exit delay.
Procedure for entering code to disarm the system.
Stopping communication reports during abort delay.
Manually bypassing specific or multiple zones.
Procedure to re-enable bypassed zones.
Using Fire, Auxiliary, and Police emergency keys.
Accessing system functions via the menu.
Viewing zone status and recalling last alarm.
Setting keypad tone and performing system tests.
Testing LCD display and changing keypad language.
Controlling X-10 devices via the keypad.
Procedure for adding, deleting, or modifying user codes.
Assigning access levels and partition permissions.
Resetting detectors, troubles, and tampers.
Retrieving and viewing system event history.
Adjusting the keypad display angle and brightness.
Setting the system's date and time.
Activating or deactivating the door chime.
Interpreting indicator lights in master mode.
Understanding LCD displays in master mode.
Procedure for arming/disarming multiple system areas.
Controlling specific partitions within the system.
How to silence alarms in partitioned systems.
Reasons for keypad beeps and sounder activation.
Message indicating the system requires service.
Interpreting faults related to control circuits.
Interpreting faults related to expansion modules.
Identifying zone-specific faults and troubles.
Understanding the event log format and common codes.
Details on various event types like arming, disarming, alarms.
Recommendations for creating a home evacuation plan.
To Next Page