Need help?Do you have a question about the GE NetworX NX-1192E and is the answer not in the manual?
General| Fire, Police, Auxiliary keys | Yes |
|---|---|
| Backlight | Yes |
| Voltage | 12 VDC |
| Compatibility | GE Security NetworX Series Control Panels |
| Mounting | Surface |
| Power Source | From control panel |
On when system ready to arm; flashes for force arm; off if zone faulted.
Steps to arm the system when leaving the premises.
How to identify and bypass unsecured zones to arm the system.
Steps to arm the system when staying inside, protecting perimeter.
How to toggle entry delay, interior bypass, and exit delay.
Procedure for entering a valid code to disarm the system.
Procedure for canceling or aborting a system report.
Step-by-step guide to bypass zones using their numbers.
Guide to bypass zones using custom descriptions.
Activates fire alarm, sends report to monitoring center.
Activates auxiliary alarm, sends report to monitoring center.
Activates panic alarm, sounds local alarm, sends report.
Displays the current status of all system zones.
Procedure for adding, modifying, or deleting user codes.
How to operate a system divided into multiple security areas.
Procedure to arm/disarm multiple partitions with a single code.
Messages indicating system faults requiring service.
To Next Page