Need help?Do you have a question about the GE NX-1348E-ICON and is the answer not in the manual?
General| Model | NX-1348E-ICON |
|---|---|
| Type | Keypad |
| Compatibility | GE Security Systems |
| Number of Buttons | 16 |
| Backlight | Yes |
| Voltage Range | 12V DC |
| Display | LCD |
| Communication Protocol | RS485 |
| Operating Temperature | 0°C to 50°C |
| Humidity Range | Up to 93% non-condensing |
Activates the fire alarm when pressed for two seconds.
Step-by-step guide to arm the system when leaving the premises.
Instructions for arming the system to protect the perimeter while inside.
Procedure for disarming the security system using a valid code.
Steps to bypass individual zones when the system is disarmed.
Guide for adding new user codes or modifying existing ones.
Assigning specific access levels and partition permissions to user codes.
Resetting smoke detectors and clearing zone troubles.
Entering the service menu to diagnose system faults.
Diagnosing system faults like over current or box tamper.
Identifying wireless zones with low battery conditions.
Detecting wireless zones that have lost communication supervision.
Troubleshooting problems with telephone line connectivity.
Diagnosing problems with system communication to the central station.
Identifying when the system clock needs to be reset due to power loss.
To Next Page