NX-1348E-ICON - 11 -
g
GE Interlogix
Group bypass
By pressing the [BYPASS] key, followed by the [0] key, then the [BYPASS] key again, all zones that are designated as
group bypass zones will be bypassed. Press the [
BYPASS
] key again -or- press the [
#
] key to exit group bypassing.
Unbypassing zones
To manually unbypass zones, perform the bypassing procedure on a zone that is already bypassed. The corresponding
icon for that zone will go off when unbypassed. NOTE: All zones will automatically be unbypassed each time the
system is disarmed.
Turning the door chime ON and OFF
The door chime is turned on or off by pressing the [CHIME] key while the system is in the disarmed state. If the chime
is on the chime led will be illuminated. If the chime is off, the chime led will be off. Each press of the [CHIME] key
will toggle the chime feature on/off and produce a momentary ding-dong sound.
To Next Page
Loading...
Need help?
General