Need help?Do you have a question about the GE NX-108E - Security NetworX NX-4 System and is the answer not in the manual?
Explains the function of various LED indicators on the keypad for system status.
Details the power light status related to primary power and battery conditions.
Explains the ready light status for system arming readiness and faults.
Describes the stay light illumination when interior zones are bypassed.
Explains the service light and how to identify specific system fault conditions.
Explains zone light behavior for bypassed, alarmed, or faulted zones.
Describes the function of Fire, Auxiliary Emergency, and Police activation keys.
Step-by-step guide to arming the security system in the AWAY mode.
Explains how to check the system's readiness status before arming.
Step-by-step guide to arming the security system in the STAY mode.
Step-by-step instructions for disarming the security system.
Explains the optional Quick Arm feature for faster system arming.
Describes how to change system modes (e.g., instant/delayed) while armed.
Explains zone bypassing, group bypass, unbypassing, and door chime features.
Explains how to cancel or abort alarm reports to the central station.
Instructions for adding, changing, and deleting user access codes.
Guide to assigning access permissions and partition control to user codes.
Guide to adjusting the keypad's tone settings.
Instructions for temporarily changing the system's active partition.
How to view zones that triggered the last alarm event.
Procedure for performing system tests like battery, communicator, or siren.
How to reset smoke detectors and zone troubles.
Steps to set the system's current time using hour and minute codes.
Steps to set the system's current date, including day of week, month, and year.
Explains the meanings of various audible tones and beeps from the keypad.
Tables for recording installer, company, and programmed function details.
Fields for the installer to document the purpose of each system zone.
To Next Page
General