GE NX-4-EUR

DAYS OF THE WEEK WHEN “ARM ONLY AFTER CLOSE” WILL BE ABLE TO ARM/DISARM
1 Sunday
2 Monday
3 Tuesday
4 Wednesday
5 Thursday
6 Friday
7 Saturday
54 53
8 Reserved
DAYS OF THE WEEK WHEN “AUTO ARMING” WILL OCCUR
1 Sunday
2 Monday
3 Tuesday
4 Wednesday
5 Thursday
6 Friday
7 Saturday
55 53
8 Disable retry
ALARM AND RESTORE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Alarm code
0
Segment 2-4
Reserved
0
Segment 5
Zone 1-8 Restore code
0
56 54
Segment 6-8
Reserved
0
BYPASS COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Bypass code
0
57 54
Segment 2-8
Reserved
0
TAMPER COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Tamper Code
0
58 54
Segment 2-8
Reserved
0
TROUBLE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Trouble Code
0
59 55
Segment 2-8
Reserved
0
SENSOR LOW BATTERY COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Sensor Low Battery Code
0
60 55
Segment 2-8
Reserved
0
SENSOR MISSING COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY
Segment 1
Zone 1-8 Sensor Missing Code
0
61 55
Segment 2-8
Reserved
0
COMMUNICATOR CODES FOR SLOW SPEED FORMATS ONLY
62 55 DURESS
0-0
63 55 AUXILIARY 1 (fire)
0-0
64 56 AUXILIARY 2 (medical alarm)
0-0
65 56 KEYPAD PANIC
0-0
66 56 KEYPAD MULTIPLE CODE ENTRY TAMPER
0-0
67 56 BOX TAMPER / BOX TAMPER RESTORE
0-0-0-0
68 56 AC FAIL / AC RESTORE
0-0-0-0
69 57 LOW BATTERY / LOW BATTERY RESTORE
0-0-0-0
70 57 POWER SHORT / POWER SHORT RESTORE
0-0-0-0
71 57 BELL TAMPER / BELL TAMPER RESTORE
0-0-0-0
72 57 Reserved
0-0-0-0
73 57 Reserved
0-0
74 57 EXPANDER TROUBLE / EXPANDER TROUBLE RESTORE
0-0-0-0
75 57 FAILURE TO COMMUNICATE
0-0
76 58 LOG FULL COMMUNICATOR CODE
0-0
NX-4-EUR Installation manual Page 80 02/07/06