EasyManuals Logo

GE PDS22xxP series User Manual

GE PDS22xxP series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
– 15 –
Note: To gain better access to the thermostat, pull
the housing down until there is enough room to
remove the thermostat.
Fresh Food and Freezer Light
Thermostats
Fresh Food Light Thermostat
The fresh food light thermostat interrupts power to
the fresh food lights when the temperature
reaches 175°F. Power is restored when the
thermostat temperature cools to 155°F.
The thermostat is located on the back of the fresh
food light housing.
To access the thermostat, remove the control
panel (see Control Panel). The thermostat is held
in place by 2 screws.
Freezer Light Thermostat
The freezer flight thermostat interrupts power to
the freezer lights when the temperature of the disk
reaches 175°F. Power is restored when the
thermostat temperature cools to 155°F.
The thermostat is located behind the freezer light
housing.
To access the thermostat, remove the freezer light
cover and housing. The housing is held in place by
5 screws.
When replacing the thermostat, cut the thermostat
wires and splice the new thermostat using bell
connectors as shown. Always use RTV102
silicone sealant to seal the end of the connector
from moisture.
Screws
Screws
Thermostat
Thermostat

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE PDS22xxP series and is the answer not in the manual?

GE PDS22xxP series Specifications

General IconGeneral
BrandGE
ModelPDS22xxP series
CategoryRefrigerator
LanguageEnglish

Related product manuals