What does ERR 1 mean on my GE Water Filtration Systems and how to resolve it?
If the GE Water Filtration System displays ERR 1, the program settings have been corrupted. Press any key and reprogram Level I settings.
What does Err 6 mean on my GE Water Filtration Systems and how do I fix it?
If the GE Water Filtration System displays Err 6, the probe may be defective or disconnected. Replace or reconnect the probe.
What does ERR 2 mean on GE Pro Elite 268-716-100-1044 Water Filtration Systems?
If the GE Water Filtration System displays ERR 2, the control is not a “North American” 60 Hz model. Install a 60 Hz Analyzer control.
What causes a regenerant tank overflow in GE Pro Elite 268-716-100-1044 and how can I fix it?
If you experience a regenerant tank overflow in your GE Water Filtration Systems, it can be due to: * Uncontrolled refill flow rate: Remove the refill flow control to clean the ball and seat. * Air leak in the regenerant line: Check all connections in the regenerant line for leaks. * Drain control clogged: Clean the drain control.
General| Brand | GE |
|---|---|
| Model | 268-716-100-1044 |
| NSF Certified | Yes |
| Product Type | Water Filtration System |
| NSF Standards | 42 |
Steps for placing the conditioner into operation after initial power-up.
To Next Page
