To Next PageTo Next PageWhat to do if my GE Dryer shakes or makes noise?
If your GE dryer is shaking or making noise, it may be sitting unevenly. Move the dryer to an even floor space, or adjust the leveling legs as necessary until it is even.
What to do if my GE Profile PTD60EBSRWS doesn’t start?
If your GE Dryer doesn’t start, first check if the control panel is “asleep” by pressing the Power button to activate it. Ensure the dryer is plugged completely into the outlet. Check the building’s fuse/circuit breaker box and replace the fuse or reset the breaker. Note that some electric dryers use two fuses/breakers, so make sure both are operating. Finally, if the light on the Start/Pause button is flashing, the dryer is paused; press Start/Pause to restart the countdown.
What to do if the Dry dryness level was chosen but load is still damp in my GE Dryer?
If the 'Dry' dryness level was selected but the load is still damp in your GE Dryer, it may be due to a mixture of heavy and light fabrics in the load. When combining these, choose 'Max Dry'. Another possible cause is a blocked exhaust system, so inspect and clean the exhaust system.
What to do if there is lint on clothes after drying in my GE Profile PTD60EBSRWS?
If you find lint on your clothes after drying in your GE Dryer, make sure to clean the lint screen before each load. Improper sorting can also cause this, so sort lint producers (like chenille) from lint collectors (like corduroy). Static electricity can attract lint, so refer to the suggestions under 'Static occurs'. Avoid overloading the dryer; separate large loads into smaller ones. Also, always empty all pockets before laundering clothes to remove any paper or tissue.
How to stop static in my GE Dryer?
To reduce static in your GE Dryer, try using a fabric softener, such as Bounce® Fabric Conditioner Dryer Sheets, which are approved for use in all GE Appliances dryers when used as instructed. Overdrying can also cause static, so adjust the setting to 'Damp'. Synthetics, permanent press, and blends are also prone to causing static, so using a fabric softener can help.
Why do clothes shrink in my GE Profile PTD60EBSRWS Dryer?
Some fabrics will naturally shrink when washed, while others can be safely washed but will shrink in the dryer. To avoid shrinkage, follow garment care labels exactly. Some items may be pressed back into shape after drying. If you are concerned about shrinkage in a particular item, do not machine wash or tumble dry it.
What to do if there is water on the floor in back of my GE Profile PTD60EBSRWS?
If you find water on the floor in the back of your GE dryer, check for a loose water hose connection and tighten it. Also, ensure that the hose has a rubber washer at the connection with the valve; if it's missing, install the rubber washer provided with the hose.
What does it mean when there are no numbers displayed during cycle, only lights on my GE Profile PTD60EBSRWS?
If your GE Dryer displays only lights and no numbers during a cycle, this is normal. It indicates that the dryer is continuously monitoring the amount of moisture in the clothes. When the dryer senses a low level of moisture in the load, it will then display the dry time remaining.
What to do if water drips from door when opened after a Steam or Fabric Refresh cycle on my GE Dryer?
If water drips from the door when opened after a Steam or Fabric Refresh cycle on your GE Dryer, this is normal, as steam and fabric refresher condenses on the inner door. Also, ensure the Fabric Refresh tank is placed correctly and firmly seated to the bottom of its compartment, as a loose tank can cause dripping.
What does Fabric Refresh Door Open displayed mean on my GE Dryer?
If your GE Dryer displays 'Fabric Refresh Door Open', verify that the Fabric Refresh door is closed before running a cycle. If the Fabric Refresh door is not properly and fully closed, the dryer will sense an improper door connection.
General| Brand | GE Profile |
|---|---|
| Model Number | PTD60EBSRWS |
| Type | Electric Dryer |
| Color | White |
| Drying Cycles | 12 |
| Control Type | Electronic |
| Energy Star Certified | No |
| Ventless | No |
| Steam | Yes |
| Dryer Venting | Vented |
| Wrinkle Care Option | Yes |
| Moisture Sensor | Yes |
| Width | 27 inches |
| Height | 39 inches |
Key safety warnings and precautions for using the dryer, including fire, shock, and injury risks.
Specific safety precautions related to gas dryer operation, including fire and explosion hazards.
Information on WiFi connectivity and smart appliance features for remote monitoring and control.
Description of various sensor and timed drying cycles available on the dryer.
Details on adjusting dryness level, temperature, and various cycle settings.
Proper ductwork, length, and installation rules for effective dryer venting.
How to run a test to check the dryer's venting system status.
