What to do if my GE Profile PTD60EBPRDG shakes or makes noise?
If your GE dryer is shaking or making noise, it may be sitting unevenly. Move the dryer to an even floor space, or adjust the leveling legs as necessary until it is even.
What to do if my GE Profile PTD60EBPRDG Dryer doesn’t start?
If your GE Dryer doesn’t start, first check if the control panel is “asleep” by pressing the Power button to activate it. Ensure the dryer is plugged completely into the outlet. Check the building’s fuse/circuit breaker box and replace the fuse or reset the breaker. Note that some electric dryers use two fuses/breakers, so make sure both are operating. Finally, if the light on the Start/Pause button is flashing, the dryer is paused; press Start/Pause to restart the countdown.
What to do if the Dry dryness level was chosen but load is still damp in my GE Profile PTD60EBPRDG?
If the 'Dry' dryness level was selected but the load is still damp in your GE Dryer, it may be due to a mixture of heavy and light fabrics in the load. When combining these, choose 'Max Dry'. Another possible cause is a blocked exhaust system, so inspect and clean the exhaust system.
What to do if there is lint on clothes after drying in my GE Dryer?
If you find lint on your clothes after drying in your GE Dryer, make sure to clean the lint screen before each load. Improper sorting can also cause this, so sort lint producers (like chenille) from lint collectors (like corduroy). Static electricity can attract lint, so refer to the suggestions under 'Static occurs'. Avoid overloading the dryer; separate large loads into smaller ones. Also, always empty all pockets before laundering clothes to remove any paper or tissue.
How to stop static in my GE Dryer?
To reduce static in your GE Dryer, try using a fabric softener, such as Bounce® Fabric Conditioner Dryer Sheets, which are approved for use in all GE Appliances dryers when used as instructed. Overdrying can also cause static, so adjust the setting to 'Damp'. Synthetics, permanent press, and blends are also prone to causing static, so using a fabric softener can help.
Why do clothes shrink in my GE Profile PTD60EBPRDG Dryer?
Some fabrics will naturally shrink when washed, while others can be safely washed but will shrink in the dryer. To avoid shrinkage, follow garment care labels exactly. Some items may be pressed back into shape after drying. If you are concerned about shrinkage in a particular item, do not machine wash or tumble dry it.
What to do if there is water on the floor in back of my GE Profile PTD60EBPRDG?
If you find water on the floor in the back of your GE dryer, check for a loose water hose connection and tighten it. Also, ensure that the hose has a rubber washer at the connection with the valve; if it's missing, install the rubber washer provided with the hose.
What does it mean when there are no numbers displayed during cycle, only lights on my GE Dryer?
If your GE Dryer displays only lights and no numbers during a cycle, this is normal. It indicates that the dryer is continuously monitoring the amount of moisture in the clothes. When the dryer senses a low level of moisture in the load, it will then display the dry time remaining.
What to do if water drips from door when opened after a Steam or Fabric Refresh cycle on my GE Profile PTD60EBPRDG Dryer?
If water drips from the door when opened after a Steam or Fabric Refresh cycle on your GE Dryer, this is normal, as steam and fabric refresher condenses on the inner door. Also, ensure the Fabric Refresh tank is placed correctly and firmly seated to the bottom of its compartment, as a loose tank can cause dripping.
What does Fabric Refresh Door Open displayed mean on my GE Profile PTD60EBPRDG Dryer?
If your GE Dryer displays 'Fabric Refresh Door Open', verify that the Fabric Refresh door is closed before running a cycle. If the Fabric Refresh door is not properly and fully closed, the dryer will sense an improper door connection.
Guidelines for environmentally safe disposal or recycling of the appliance and its packaging.
Information on WiFi Connect features and setup for compatible GE Appliances dryers.
Explanation of various buttons, lights, and display indicators for operating the dryer.
Detailed explanation of various dryer cycles, control lock, and ecoDry feature.
Details on dryness levels, temperature settings, and how to adjust them for optimal drying.
Explanation of Wrinkle Care and Damp Alert options for better garment care.
Information on drum light, tangle control, and static reduction options.
Instructions for using the Fabric Refresh feature and filling its dedicated tank with approved liquids.
Instructions for installing and using the optional drying rack for delicate items.
How to run a diagnostic test to check the venting system's condition and interpret the results.
Instructions for cleaning the dryer's interior, exhaust duct, and fabric refresh nozzle.
Procedures for cleaning the lint filter before each use to ensure proper airflow and drying efficiency.
Guidelines for cleaning the dryer's exterior surfaces, stainless steel drum, and drum light.
Addresses problems like no heat, inconsistent drying times, wrinkles, shrinkage, and lint accumulation.
Resolves issues related to static, steam cycles, water leaks, and garment appearance after drying.
Specific troubleshooting for problems encountered with steam and fabric refresher cycles.
General| Model | PTD60EBPRDG |
|---|---|
| Type | Electric Dryer |
| Color | Diamond Gray |
| Dryer Venting | Vented |
| Number of Drying Cycles | 12 |
| Energy Star Certified | Yes |
| Wrinkle Care Option | Yes |
| Steam Option | Yes |
| Smart Dry Technology | Yes |
| Drum Light | Yes |
| Ventless | No |
| Brand | GE |
To Next Page