GE Profile HE Washer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company
17
g
GE imagination at work
Test 8 – Error Code Test
• The display will initially show “t8”.
• Press the Start button. If there are Errors, the Display
will show “t8” and then the display will show the last error
code.
• The control will sort a maximum of 5 errors on a “first in,
first out” basis. This will be displayed continually until the
Start button is pressed.
• Press the Start button and the Control will exit and
Power Off. This exercise will clear all faults and allow
the control to be operational again.
• If there are no Errors, The Display will toggle between
“t8” and “nE” until start button is pressed. Press the
Start button and the Control will exit and Power Off.
To Previous Page
Loading...
Need help?
General