Protimeter MMS Moisture Measurement System Page 3
The following probes and sensors are included in the standard Protimeter
MMS kits:
• The Hygrostick
®
(POL4750) and Humistick
®
(POL7750-2) probes
measure relative humidity (%RH) and ambient air temperature (T
AIR) in
rooms or materials. They can be connected to the Protimeter MMS
instrument either directly or by means of the Hygrostick/Humistick
extension lead.
• The surface temperature sensor (TS) is used when investigating
condensation situations.
• The moisture probe is used to obtain percent moisture content values in
wood or wood moisture equivalent (WME) values in other non-conductive
materials.
• Deep wall probes are used to obtain WME values deep below the surface in
solid structures such as walls and floors.
EC 1
EC 2
JC
Search Mode Sensor
To Next Page
Loading...
