ā 36 ā
4. Remove the 2 clips and insulation strip from the
top of the extension brace.
5. Remove the four 1/4-in. hex-head screws from
the extension brace. (1 screw hidden under
insulation strip.)
Extension Brace
Insulation Strip
Hidden Screw Location
Clip
Clip
6. Remove 1/4-in hex-head screw that attaches
the back of the extension brace to the range.
7. Carefully lift the left side of the control panel
support, slide the extension brace forward, and
remove the extension brace from the range.
8. Remove the four 1/4-in hex-head screws from
the back of the side panel.
(Continued next page)
To Next Page
Loading...
