GE Range

Runners
To Support
Leveling Legs
Panel
Range
Opening
Range
Opening
Runners
for Rolling
the Range
into Position
2 Lift the toek
ick out of the foam base.
Installation Preparation
MOVE THE RANGE INDOORS
1 Tilt the range forward on the skid.
STEP 2
3 Tilt the range to one side and remove the foam block.
6 Mov
e the range indoor
s. Position the range
in front of the installation location.
7 Place the appliance runners on the floor
at the left and right sides of the opening.
The r
unners provide a surface for rolling
the range into the final position and will protect
the floor finish. The runners must be removed
befor
e leveling the range.
12
Insert Blade Under
the Range Legs
4 Slide the blade of the hand-truck beneath
the front and back legs.
IMP
ORTANT
:
Place the hand-tr
uck straps below
the oven door handles.
5 Tilt the range to lower the hand-truck wheels
off the skid.
Hand-Truck
Straps Below
Oven Door
Handles
Toekick
Toekick