0
* * : !5 !: 7
.! ;, ! 56/ 5&' ,
D The AOP mode is broken down into three positions, allowing three priorities:
0 (,
0 <: (=
$ (,
/# ! ;, ! ' * 9 ( 5 !
" ( ! ! ( (, ! ;D
%! ! ( ( ! " !
(, ! ;D
Note: The focal track and filter are selected automatically (pressing the key for each has
no effect). The following can be selected via their keys: screen-film combination,
film density control.
( ! !+
D The AEC Mode is used to select the kV values manually, and mAs values
automatically.
.! "# ! ;,$ " ; " "
( " ,
D Manual mode is used to select kV and mAs values.
.! > 9, ' ;, ! *8> ' ;, !
""
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
