Revision H TONOPORT V 7-5
2001589-023
Firmware Loading Procedure for FW1.4: Loading Procedure
Switch off TONOPORT V.
Disconnect TONOPORT V from PC.
Check the correct Firmware version on TONOPORT V and set the correct
language:
Screenshot of a successful loading procedure with Hyper Terminal:
Step Action Diplay
1 Switch on TONOPORT
V
HH:MM (time)
2 Press “INFO” 5 times H 5
3 Press “START” 14 : 01
(14 = Version FW 1.4
01 = German language)
4 Press "INFO" to select
the correct language
(which was displayed at
Step 1 of the Loading
Procedure)
14 : 01 (German)
14 : 02 (English)
14 : 03 (French)
14 : 04 (Italian)
14 : 05 (Spanish)
5 Press "START" to save
the language setting
HH : MM (time
To Next Page
Loading...
