Need help?Do you have a question about the GE Universal Remote and is the answer not in the manual?
General| Backlit Keypad | No |
|---|---|
| Pre-programmed Codes | Yes |
| Learning Function | No |
| Device Compatibility | TVs, DVD players, Blu-ray players, audio systems, streaming devices |
| Number of Devices Supported | 4 |
| Programming Method | Auto Code Search |
Instructions for installing batteries and details on the battery saver feature.
Information on how to save programmed codes and the process of code setup.
Explanation of buttons for selecting devices and controlling playback (TV, DVD, DVR).
Details on the INPUT, INFO, MENU, and DOT buttons for device interaction.
Overview of SETUP, MUTE, OK, VOLUME, CHANNEL, PREV.CH, EXIT, NUMBERS, and ENTER buttons.
Step-by-step guide for programming the remote using direct 4-digit codes.
Instructions on how to search for compatible codes when direct entry fails.
Method to identify the currently stored 4-digit library code for a device.
Explains how to use the SHIFT button to access secondary functions like MENU and OK.
Guidance on controlling combo devices and separate power on/off functions.
Setting up volume/mute control to punch-through to a specific mode.
Procedure to enable each mode to use its own volume/mute control.
Steps to take if the remote or its features do not operate the product.
Explanation of the red indicator blinking after programming a code.
Information on managing programmed codes and finding support online.
Terms and conditions of the 90-day limited warranty for the product.
To Next Page
