GE Universal Remote User Manual

8
Using Your Remote
Code Identication
The Code Identication Feature allows you to
identify the 4-digit library code stored under your
device button. For example, if you want to nd out
what 4-digit code is stored under your TV device
button, follow the six steps below:
1. Press and hold the
SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired
device button (TV, DVR, etc.). The
red indicator blinks, then stays lit.
3. Press and release the
SETUP button.
The red indicator blinks once and
remains lit.
4. To nd the rst digit
for the code stored
under the device
button pressed in step
2, press each numeric
button from 0-9 in
turn. The number that
causes the indicator
light to blink is the rst
digit in your code.
5. To nd the second digit, repeat step 4, this
time when the red indicator blinks off this is the
second digit.
6. Repeat step 4 to nd the third and fourth digits.

GE Universal Remote Specifications

General

Backlit Keypad	No
Pre-programmed Codes	Yes
Learning Function	No
Device Compatibility	TVs, DVD players, Blu-ray players, audio systems, streaming devices
Number of Devices Supported	4
Programming Method	Auto Code Search