GE Universal Remote User Manual

4
INPUT
For some TVs, press repeatedly
to select from available viewing
sources (antenna, cable box,
DVR, etc.).
RECORD, PLAY, STOP,
REW, FF, PAUSE DVR
control buttons operate
your DVR even when the
remote is set to operate
the TV. Also operates DVD
Scan -/+. Note the DVR
buttons also control DVD
when in DVD Mode.
Some buttons on the remote might have functions that
are referred to by different names on the device you
are controlling. E.g., PREV.CH may be called RECALL,
or ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.g., your product must have PREV.CH ability
for the PREV.CH button to operate this feature.
TV, CBL/SAT, DVD/DVR
Selects product to be
operated.
Red Indicator
Lights when any
button is pressed.
Button Functions
INFO button brings up DVD
Display or Control Menu for
Chapter/Track/Title number,
Time remaining/elapsed,
system information, etc. Also
displays on-screen channel
information.
MENU Press and release
SHIFT/SETUP then MENU/
INFO to display the Menu on
the TV. See “Using SHIFT
for Menu and Navigation”
description on Page 9 for
more information.
DOT: Used to select digital
channels, e.g., 2.3.

GE Universal Remote Specifications

General

Backlit Keypad	No
Pre-programmed Codes	Yes
Learning Function	No
Device Compatibility	TVs, DVD players, Blu-ray players, audio systems, streaming devices
Number of Devices Supported	4
Programming Method	Auto Code Search