GE UR series - Software 5.81; G Software Exceptions

UR Family Software 5.80 - Release Notes 31
Software 5.81
G Software Exceptions
Applicable: UR Setup, UR Engineer
Description: The following software exceptions have been corrected with software release 5.81:
Software Exceptions
• Overcurrent elements were being inadvertently removed when the relay
order code had software option # 12 or 13 and the process bus (HardFiber)
module.
• C70 Phase Unbalance Operands not appearing correctly in FlexLogic
graphical view when printing
• Random crashes occurring while customer was modifying B90 settings
files
• B90 IOC Operands not appearing correctly in FlexLogic graphical view
when printing
• For B90, the values in the Bus Metering screen were not being shown
correctly