GE Vivid S70 User Manual

Zoom
Vivid S70 / S60 – User Manual 4-9
BC092760-1EN 01
Zoom
The system supports two types of zoom:
• Display zoom: Magnifies the image display of a selected
area.
• High resolution (HR) zoom: Concentrates the image
processing on a selected area of the image, resulting in
improved image quality and a higher frame rate in the
chosen region of interest (ROI).
Display zoom
1. Rotate the Zoom knob clockwise on the Control panel.
The resulting magnified image appears in the acquisition
window. An un-magnified image is displayed in the right
corner showing the outlined zoomed region.
2. Use the trackball to position the zoom area over the desired
portion of the image.
3. To turn off the Display zoom, rotate the Zoom knob
counterclockwise.
HR zoom
1. Press the Zoom knob.
2. Use the trackball to position the zoom area over the desired
portion of the image.
3. Increase size as desired by turning the Zoom knob
clockwise.
4. Press Zoom one more time to turn off the HR zoom.

GE Vivid S70 Specifications

General

Power Requirements	100-240 V AC, 50/60 Hz
Application	Cardiac, Vascular, Abdominal, OB/GYN, Small Parts, Pediatric
Operating Modes	Color Doppler, PW Doppler, CW Doppler, Tissue Doppler Imaging
Advanced Imaging Options	AutoEF
Connectivity	DICOM, USB, Ethernet, HDMI
Transducer Ports	4
Weight	Approximately 80 kg
Transducer Frequency Range	1.5 MHz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Humidity Range	30% to 80% non-condensing
Image Modes	B-Mode, M-Mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler
Supported Probes	Linear, Convex, Phased Array, Volume Probes
Probe Connectors	Compatible with a wide range of probes
Measurement Tools	Comprehensive cardiac measurement package, including LV, RV, LA, RA, valves, and great vessels