GE Vivid S6 N User Manual

GE
BASIC SERVICE DOCUMENTATION.
COPYRIGHT GENERAL ELECTRIC COMPANY.
© 2013 and 2015 General Electric Company.
All Rights Reserved.
11.SEP.2015
FN091065_BSP-BT12-VS5N-
PRELIMINARY
Vivid™ S5 N and Vivid™ S6 N
Service Manual
Vivid S5 N and Vivid S6 N software v12.x
Part Number: FN091065
Revision: 2

GE Vivid S6 N Specifications

General

Integrated DVD	Yes
Model	Vivid S6N
Probe Connectors	3
Connectivity	DICOM, Ethernet
Type	Ultrasound
Manufacturer	GE
Operating System	Windows-based
Display	17" LCD
Weight	Approx. 50 kg

Summary

Introduction

Section 1-3 Safety Considerations

Details critical safety precautions for operation, service, and repair.

Section 1-4 Lockout/Tagout (LOTO) requirements

Outlines OSHA Lockout/Tagout requirements for service personnel safety.

Section 1-8 Customer Assistance

Site Preparations

Section 2-2 Console Requirements

Section 2-3 Facility Needs

System Setup

Section 3-4 Preparing for Installation

Section 3-5 Completing the Hardware Installation

Provides instructions for connecting printers, peripherals, and probes.

Section 3-6 Configuration

Covers system configuration, date/time, language, units, and service screen setup.

Section 3-7 Connectivity Setup

Details connecting to DICOM devices, EchoPAC servers, and network configurations.

Functional Checks

Section 4-2 General Procedures

Section 4-3 Functional Checks

Details tests for basic controls, peripherals, mechanical functions, and back-end processor.

Section 4-4 Image Testing

Provides guidelines for testing 2D, M Mode, Color Mode, Doppler, and TVI imaging.

Components and Function (Theory)

Section 5-3 Front End Unit

Details the scanner subsystem and front-end subsystem components.

Section 5-4 Back End Processor

Explains the BEP's role and its components like CPU, base board, and hard disk.

Section 5-5 Internal and External Input/Output (I/O)

Section 5-6 Power Supply System

Section 5-7 Top Console with Monitor and Operator Panel

Service Adjustments

Section 6-1-2 LCD Display Adjustments and Calibration

Provides procedures for adjusting and calibrating the LCD display settings.

Section 6-1-5 Beamformer Calibration

Diagnostics/Troubleshooting

Section 7-2 Diagnostics

Explains diagnostic tools and provides a summary of the diagnostic procedure.

Section 7-3 Performing Full System Diagnostics

Details how to perform automatic Full System Diagnostic tests.

Section 7-4 Performing Front End (FE) Diagnostics

Covers diagnostic tests for RFI, TR32, PIB, and PSB boards.

Section 7-5 Monitoring Tests

Describes tests for fixed voltages, temperatures, fans, battery parameters, and Tx voltages.

Section 7-6 Performing Back End Diagnostics on the System

Explains how to perform diagnostic tests on various Back End hardware components.

Section 7-7 Automatic Error Log

Replacement Procedures

Section 8-3 Control Console Components Replacement Procedures

Covers replacement of monitor, monitor arm, keyboard assembly, etc.

Section 8-4 Keyboard Assembly Replacement Procedures

Section 8-6 Lower Section Components Replacement Procedures

Section 8-7 Mechanical Components Replacement Procedures

Section 8-8 Software Loading

Covers software upgrade, installation, re-installation, and loading procedures.

Section 8-9 Peripherals - Replacement Procedures

Care and Maintenance

Section 10-2 Why Perform Maintenance Procedures?

Section 10-3 Maintenance Task Schedule

Provides a schedule for care and maintenance tasks, including safety warnings.

Section 10-4 System Maintenance

Section 10-6 Electrical Safety Tests

Outlines electrical safety tests, current leakage limits, and procedures.

Section 10-7 Excessive Current Leakage