GE Vivid S6 N - 3-7-1-3 Dataflow Examples; 3-7-1-4 Stand-alone Vivid S5 N or Vivid S6 N; 3-7-1-5 “Sneaker Net” Environment

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-101
PRELIMINARY
3-7-1-3 Dataflow Examples
3-7-1-4 Stand-alone Vivid S5 N or Vivid S6 N
In this scenario, images will most likely be reviewed from a DVD or MOD media type. If digital images
are stored, they should be saved directly on a MOD.
3-7-1-5 “Sneaker Net” Environment
In this scenario, the EchoPAC PC (one or several) is used for review of studies acquired on one or more
Vivid S5 N or Vivid S6 N scanners without being connected in a network. Images can be stored on the
scanner’s internal hard drive (recommended) or on a dedicated MOD.
Figure 3-116 Examples of Dataflows
RemoteArch-RemoteHD dataflow:
A remote database is used for patient archiving.
Images are also stored to a remote archive.
Vivid S6 N
LocalArchive-Int.HD dataflow:
The local database is used for patient archiving.
Images are stored to internal hard drive.
Worklist/Local Archive-DICOMServer/Int.HD dataflow:
Search in the DICOM Modality Worklist, the patient found is
copied into local database.
The patient information and the examination results are
stored to the local database.
Images are stored to a DICOM server and to an image net-
work volume on the local hard drive.
EchoPAC PC
DICOM SERVER