GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
3-64 Section 3-4 - Preparing for Installation
PRELIMINARY
3-5-1-7 Sony UP-D25MD Color Video Printer
NOTE: The information provided in this section is also applicable to the older model (Sony UP-D23MD) shown
in Figure 3-77, below.
NOTE: After physical connection of the printer to the system, to configure the appropriate hot keys to activate
printing direct from the control panel, follow the instructions in ‘P1 and P2 Hot Key Configuration via
Vivid S5 N/ Vivid S6 N Connectivity Settings” on page 3-28.
The Digital Color Printer can be connected to either of the USB ports (upper or lower) on the rear
connectors panel.
Figure 3-76 Sony UP-D25MD Color Video Printer
Figure 3-77 Sony UP-D23MD Color Video Printer
IMPORTANT During Stand-by mode, it is NOT recommended to introduce or remove USB
devices; this may cause the system to lock-up during the boot-up procedure.