GE Vivid S6 N - Stopping the Firewall on Windows XP Service Pack 2

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-157
PRELIMINARY
6.) When finished, click Close.
7.) Now you can try to reconnect the network computer to the Vivid S5 N or Vivid S6 N system.
Stopping the Firewall on Windows XP Service Pack 2
1.) On the network computer, access the Control Panel, as follows:
a.) Press Start.
b.) Select Settings
c.) Select Control Panel from the Menu
2.) Double-click on Windows Firewall.
The Windows Firewall dialog box opens:
3.) Select the General Tab.
4.) Enable the Off check box (as shown in Figure 3-179).
5.) Press OK.
6.) Close all windows to return to the scanning screen.
Figure 3-179 Windows Firewall Dialog Box