GE Vivid S6 N - P1 and P2 Hot Key Configuration via Vivid S5 N; Vivid S6 N Connectivity Settings

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
3-28 Section 3-4 - Preparing for Installation
PRELIMINARY
P1 and P2 Hot Key Configuration via Vivid S5 N/ Vivid S6 N Connectivity Settings
1.) Press Config (or F2); select Connectivity (in the lower part of window).
2.) Select the Additional Outputs tab.
3.) From the Button drop-down menu (see Figure 3-21), select the button to be configured - either the
P1 (Print) button or P2 (Alt+Print) to activate a variety of outputs.
4.) Use the left or right arrows below to add any of the available options (listed on the left) as Outputs
(listed on right).
5.) From the listed Outputs, select (highlight) the required output, and select Advanced to configure
the output device accordingly.
.
Figure 3-21 Configuring Control Panel Hot Keys for Printing
Figure 3-22 Printer Properties Screen
1
2
3
4
5
6
7