GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-21
PRELIMINARY
Section 7-3
Performing Full System Diagnostics
When performing the automatic Full System Diagnostic tests, it is strongly recommended to start with
the Full System Test (FE and BEP) - especially if the Vivid S5 N or Vivid S6 N system shows signs of
an intermittent problem. As described in this section, the testing sequence can be paused and restarted
at any stage, providing a quick and easy method of reviewing any detected faults.
The different types of Full System Diagnostic Tests are described in detail in the 7-2-4 "Diagnostic Test
Window Menu Options" on page 7-11. For instructions on performing each of these tests, refer to the
following information:
• 7-3-1-1 "Full System Test (FE and BEP)" on page 7-22
To Next Page
Loading...
