GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-17
PRELIMINARY
Verifying the Language Change
Once the language is installed, it is necessary to verify that the language change was correctly
implemented. This test requires the selection of various special language keys used in the
newly-installed language and to verify their correct display on the screen.
1.) Log on in Maintenance mode.
2.) From the Desktop screen, open Microsoft Notepad.
3.) Press the Alt Gr key and at the same time press a special language key and verify that the selected
letter/symbol is displayed on the screen.
4.) Repeat the previous step using other special language keys to confirm that the language change
has been correctly implemented.
To Next Page
Loading...
