GE Vivid S6 N - 8-9-7-5 Digital Color Printer Installation Procedure

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-254 Section 8-8 - Software Loading
PRELIMINARY
8-9-7-5 Digital Color Printer Installation Procedure
1.) Place the Digital Color Printer on a stable surface close to the Vivid S5 N or Vivid S6 N scanner.
2.) Using the power cable (provided with the printer), connect one end of the power cable to the power
IN socket at rear of the printer, and the other end to the printer peripherals outlet at the rear of the
scanner.
3.) Connect the USB cable between the USB port at the rear of the printer and either of the USB ports
(upper or lower) on the scanner rear connectors panel.
NOTE: For configuration instructions, see “Configuring Printing Buttons P1 and P2” on page 3-27.
4.) Proceed to perform the following functionality tests:
- “Grounding Continuity” on page 10-23
- “Chassis Current Leakage Test” on page 10-24
- “Color Printer Test” on page 4-33