GE Vivid S6 N - 8-3-3 Monitor Cover Replacement Procedure; 8-3-3-1 Tools; 8-3-3-2 Preparation; 8-3-3-3 Monitor Cover Removal Procedure

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-37
PRELIMINARY
8-3-3 Monitor Cover Replacement Procedure
8-3-3-1 Tools
Use the appropriate flat and Phillips type screwdrivers and the appropriate Allen keys.
8-3-3-2 Preparation
Shut down the Vivid S5 N or Vivid S6 N ultrasound unit, as described in 4-2-3 "Power Shut Down" on
page 4-7.
8-3-3-3 Monitor Cover Removal Procedure
8-3-3-4 Monitor Cover Removal Procedure
1) Remove the monitor, as described in “Monitor Removal Procedure” on page 8-26.
2) Place the monitor face down on a clean, object-free work surface.
3.) Remove the monitor rear cover by releasing 4 retaining screws and lifting the cover off the back of
the monitor, as shown in Figure 8-45.
Figure 8-45 Lifting the Cover off the Rear of the Monitor