GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-175
PRELIMINARY
Activate e-Vue
1) From the MPEGVue Startup Menu, click on the Activate e-Vue button.
The Patient List is displayed, listing all e-Vue exams received (refer to Figure 3-203, above).
2) Click on the required examination Exam Date (labeled 1 in the example above) to select and
display images of that exam.
The MPEGVue screen is displayed as shown in the example in Figure 3-185 on page 3-162.
Using Patient Manager
1) From the MPEGVue Startup Menu, click the button.
The MPEGVue Patient Manager window opens, as shown below:
The MPEGVue Patient Manager window has four tabs that provide access to the following utilities:
• Manage Exams from Email
• Manage Exams from e-Vue
• Manage Other Exams
• System Configuration
Note: By default, when the MPEGVue Patient Manager window is first opened, the Manage
Exams from Email tab is activated.
2.) Manage Exams from Email, as follows:
a.) Make sure the Manage Exams from Email tab is activated as shown in Figure 3-204.
b.) The Patient List displays details - in table format - of all patient exams received by email
(Patient ID, Patient Name, Exam Date, etc.).
Figure 3-204 MPEGVue Patient Manager Window - Manage Exams from Email Tab
To Next Page
Loading...
